OTHER

Proportioning valve supporting bracket

The default bracket in a Hiace limits the rear breaking force and also isn’t suitable for a lowered vehicle. Using uivehicle’s break proportioning valve support bracket, a lowered (up to 40mm) vehicle can adjust the rear break force as normal. This product is suitable for all type of Hiace. ※Not suitable for Hiace series H200 released from 2017.12~present with VSC (side-slip prevent device). ※Not suitable for Wagons after 07/2018.

Brake Hose Relocation Bracket Kit　　New products！！

When a Hiace with a VSC is lowered, the brake hose can be installed at an angle that could lead to the brake hose breaking. uivehicle’s relocation bracket kit prevents this breakage. ※ Suitable for Hiace series H200 released from 2017.12~present with VSC (side-slip prevent device).
VSC (side-slip prevent device) mounted Hiace (standard ride height) There is space between rear brake hoses and metal fitting joints.	in case of 3 inch lowered ride height It deforms the brake hoses to be shape of「く」, result in angles between rear brake hoses and metal fitting joints, when driving, the joint part is rubbing because of sway.	Install uivehicle’s relocation bracket kit. It is easy to install.
After installing, It ensures space between rear brake hoses and metal fitting joints.

Automatic Headlamp Leveling System supporting kit
(for Hiace with genuine discharge installed)

When loading a lowered Hiace, the rear will sag, which leads to the front headlights to be point up away from the road. uivehicle’s automatic headlamp leveling system has developed to keep the lights facing the road through the use of a specially designed bracket. Please adjust the mounting holes based on the amount lowered. This kit supports Hiaces lowered by 30mm~80mm and those with additional Rear stabilizer Bars installed.

Reinforced Torsion Bar　New products！！

		uivehicle’s reinforced torsion bars are designed to be used with various levels of lowed vehicle, allows customers lower the ride height without compromising ride comfort. The products come in two sets: 2WD, 4WD. 2WD: φ26.0/φ26.9 /φ27.5 4WD：φ24.9/φ26.9
For 2WD, please check the table shown below to choose a right size. And please contact us for more details.
※Please see below for important disclaimers before purchasing this product.

Reinforced Drive Shaft CV Boots kit

The product is ideal for lowered and lifted 4WD vehicles. It increases the lift of the front drive shaft CV boots (inner side). The kit is recommended if genuine shaft CV boots are worn out and needs to be replaced. (Only for 4WD vehicles)

contact us